November 20, 2026, 2:02 pm | Read time: 6 minutes
A running pond pump keeps the water moving. In winter, however, this can become a problem for fish. When should the pump be turned off? myHOMEBOOK asked Torsten Brämer, the founder of the online gardening community “Wir sind Garten.” The gardening expert explains what is important in winter.
Not Every Pond Pump Is Suitable for Winter
Before the winter break, it’s worth taking a look at the technology, because not all pond pumps are the same. Basically, there are two types. Submersible pumps are placed directly in the water. Pumps for dry installation are located outside the pond, such as in a separate pump chamber.
The tasks also differ. Filter pumps keep the water moving and supply the filtration system. Stream pumps transport water to a small waterfall or stream. Other models drive fountains and water features. More powerful systems are used for larger swimming and koi ponds.
These differences play an important role in winter. Above all, it matters whether a pump can withstand frost. “Many ordinary filter, stream, and fountain pumps should be removed from the pond before the first frost. With waterfalls and fountains, another problem arises. Splashing water can quickly freeze at subzero temperatures,” warns Torsten Brämer.
However, there are special pumps that manufacturers explicitly designate as frost-resistant. They can remain in the pond and continue running. It is not only important whether the pump is underwater. The connected hoses and lines should also be frost-resistant.
Where the Pump Should Be Placed in the Fish Pond
If a frost-resistant pump continues to run in the fish pond, its position is crucial. Water behaves differently in the cold. At about four degrees Celsius, it is heaviest and sinks to the bottom. Colder water becomes lighter and stays on top. In frost, an ice layer eventually forms on the surface, acting as an insulating layer. At the bottom of the pond, fish find a relatively warm retreat if the water is deep enough. According to the Central Association of Zoological Companies (ZZF), a depth of at least one meter is considered sufficient.
A powerful pond pump can disrupt this natural temperature stratification. It pulls the warmer water from the bottom to the top and mixes it with the colder layers. As a result, fish lose their protected resting zone. In the worst case, the entire pond cools down more.
Brämer therefore advises hanging frost-resistant pumps higher in fish ponds, well above the deepest point. This way, the warmer water at the bottom remains as undisturbed as possible.
Depending on the pond and fish stock, an ice-free holder or aeration might be a better choice than strong circulation. An ice-free holder is usually a ring of styrofoam with a lid that floats on the water. The styrofoam insulates the water surface in its center, leaving a small opening in the ice. Aeration, on the other hand, pumps air into the water through a hose. The rising bubbles keep the surface moving, preventing it from freezing quickly.
Related: How a Tennis Ball Can Save Wildlife in the Garden
Pay Attention to Manufacturer’s Instructions
Pumps without the manufacturer’s frost approval should be removed before the first frost. When removing them, a thorough cleaning is advisable. Dirt, plant debris, and deposits should not remain on them. Hoses and lines also deserve attention. If water remains in them, it can freeze and expand, potentially damaging components.
Filters and UV clarifiers that are not winterproof should also be stored for the winter. A UV clarifier uses ultraviolet light to kill algae and germs, ensuring clearer water. Gardening expert Brämer recommends turning off both devices, draining them, and storing them according to their care instructions.
There is no universal rule for storing removed pumps, emphasizes Torsten Brämer. “Some need to be cleaned and stored dry. Others require a water bath to prevent certain seals from drying out,” the gardening expert notes. The manufacturer’s instructions for each model are decisive. In any case, the pump should be stored in a frost-free location.
Even a frost-resistant pump does not need to run throughout the entire cold season. Whether continued operation is worthwhile depends on its task and the conditions in the pond.
What Happens to the Garden Pond Without a Pump?
A pond does not necessarily need a running pump in winter. This is especially true for natural garden ponds without fish. However, the surface should not completely freeze over if frogs are overwintering in it. In winter dormancy, the animals breathe through their skin. If they become active, they surface to breathe. If they cannot find an open spot, it can be fatal, according to the Leibniz Institute of Freshwater Ecology and Inland Fisheries (IGB).
This is even more important for ponds with fish. At the bottom of the pond, plant debris and other organic materials decompose. This decomposition consumes oxygen and releases toxic gases. A closed ice cover acts like a lid on a pot. The gases cannot escape, and fresh oxygen cannot enter the water.
The previously mentioned ice-free holders or aeration can help. Both keep a small area in the ice open, allowing gas exchange to continue.
Reeds and other plants with hollow stems also help. “Their stalks support gas exchange when the water surface freezes,” explains Torsten Brämer.
The gardening expert advises against breaking a closed ice cover with a hammer or ax. The resulting pressure waves spread through the water and can significantly disturb the fish.
Remove Leaves and Plant Debris Before Winter
Not only the pump needs attention in the fall. “The pond should also take as little organic material as possible into winter. Autumn leaves, in particular, burden the water. They sink to the bottom, decompose, and promote the formation of sludge,” explains gardening expert Brämer. The less that rots at the bottom, the fewer toxic gases accumulate under the ice later.
A leaf protection net over the pond catches a large portion of the leaves. Leaves already floating in the water can be removed with a net. Dead plant parts should also be removed from the water. However, a radical cutback of reeds in the fall is not always advisable, according to Brämer.
Which Plants Should Not Be Placed Next to the Heat Pump?
Things to Do in Your Allotment Garden Before the First Frost
How Much Electricity Does a Running Pond Pump Cost in Winter?
In addition to frost protection, electricity consumption also plays a role. After all, a pump often runs for several months in winter. According to Brämer, the cost can be calculated with a simple formula:
Power Consumption in Watts ÷ 1,000 × Operating Hours × Electricity Price
Assuming an electricity price of 37 cents per kilowatt-hour, the following costs arise for continuous operation from November to March:
- A pump with 10 watts costs about 13 euros.
- A pump with 40 watts costs about 54 euros.
- A pump with 100 watts costs about 134 euros.
The calculation is based on 151 days or 3,624 operating hours. “The amounts serve as a guide. The actual consumption depends on the specific model and its runtime,” adds Torsten Brämer. Additional electricity costs for filters, UV clarifiers, or a pond heater may also apply.